Why Is My Frigidaire Front Load Washer Not Draining Or Spin?

If your washer won’t drain or it’s not draining your stuff correctly, it means that there’s a coin or stuff that is a trap in your washer. You need to remove what’s trapped inside your washer and clean it carefully.

To do that, first, check your washer drain hose to determine if it’s twisted or bent. If your drain hose is bent, fix it out.

Additionally, if your washer still doesn’t drain or spin, you may need to contact a technician immediately to check your washer.

Moreover, one of our household tasks is laundry; you can laundry your clothes everyday or every other day.

Everybody wants to finish their task right away without being frustrated to do it.

It is why using a Frigidaire front load washer is very useful to make your work easier.

Nowadays, we can’t deny that many machines are made to make our lives much more comfortable, and one of them is a washer.

However, there are times that no matter what quality your washer is, it can still be a trap with anything, especially coins from your clothes.

That’s why you need to check first your pants pockets if there are coins or paper that might damage your washer. Always do this each time you put your laundry in a washer.

To know more about the reason why your washer isn’t working correctly, here are some reasons that we strictly evaluate for you.

If you want to know more, you may continue reading this article.

Why Is My Front Load Washer Not Draining Or Spinning?

There are several reasons why your Frigidaire front load washer isn’t spinning or draining properly.

Below are the four reasons that may cause your Frigidaire front load washer isn’t working well.

1. Your Laundry Load Is Unbalanced

First, is you have an unbalanced laundry load. Your laundry must reach the minimum or maximum weight your washer needs.

So if your laundry is more than the maximum weight your washer needs, you may need to redistribute your laundry loads and rerun your washer.

2. The Washer Drain Hose Is Clogged, Twisted, Or Frozen.

There are times that our clothes carry unnecessary pieces of stuff, especially in our pants. We sometimes forget that we put coins, paper, clips, or candies in our pockets.

Also, we forget to remove those kinds of stuff that cause clogged to your washer drain hose.

It is why you need to make sure that your drain hose is properly maintained and clean before and after usage.

3. Using An Extension Cord

One of the reasons your washer doesn’t work well is that you’re using an extension cord. Which gives your washer lesser voltage that causes your machine to overheat and shut down early.

It is why you need to plug your washer cord directly into your outlet instead.

4. Over Usage Of Detergents

Putting a lot of detergents may damage your washer system too. Every washer different level to comply in putting a detergent.

Too much detergent may cause over bubbles inside the machine that damages your washer inside the system.

It is why if you’re a new Frigidaire front load washer owner, you need to study and check the instruction given upon delivery of your item.

Furthermore, a functional washing machine is a useful tool for getting dirt, sweat, and stains out of your clothes.

So, if you have an unstable washer, its capacity to drain and spin will also be affected.

As homeowners, you need to act if you notice that your washer isn’t in good condition.

How Do You Fix A Frigidaire Washer That Won’t Drain?

If your Frigidaire washer fails to drain after you spin the cycle, and you hear the pump isn’t working, it’s the sign that your drain hose is blocked.

In some circumstances, you need to fish out what’s inside your washer hose. However, if you fail to remove what blocks your hose inside, you may try to clear it from the other end.

However, some kinds of stuff can’t be easily removed from the clogged washer hoses, so if you don’t know how to fix your washer, contact an expert to fix it for you.

Below are the steps on how to fix your Frigidaire that won’t drain.

1. Prepare Your Material

In every fixing process, you need to prepare your material first. It is the first thing you should do to put everything in place when you start working.

2. Unscrew The Front Panel

Start by unplugging your washing machine and emptying the water inside. Make sure that you secure the water out from the washer.

For easier draining of water, you may drain the tub of your washer by using gravity. Place your washer drain hose on the floor near your drain, then clamp the hose and take all the water out.

Once your washer is empty, start supporting its front hose, then remove the two screws that secure your washer front panel.

3. Open Your Washer

Before you work on the inside of your washing machine, make sure that your machine is unplugged from the outlet.

After unplugging your washer, pull the lower edge of your panel outward and unhook its top. Hence, you might need to remove the entire shell in some types of the washing machine to access the pump inside your washer.

4. Look For Clog And Pull It Out

The pump inside your washer is made with translucent housing, so it’s easy to see if there’s a piece of cloth that might wrap your pump.

You need to loosen the clamp that holds your washer bottom and remove the hose slowly.

After that, remove the belt from the pulley on the bottom side of your washer pump, and if the material that clogs is visible, pull it out right away.

When pulling it out, twist the fabric as you pull it outside the pump.

However, if you don’t see the clog in your washer pump, drain your hose near the pump, then you could stick in the outlet where the hose connects to the bottom of your Frigidaire front load washer.

5. If There’s No Clog, Check The Pump And Remove It

If nothing is clogging your washing machine hose, but still, it won’t drain, its pump should be the problem.

In most cases of washing machines that won’t drain have a noise pump, and if left untreated, it might start to leak.

To fix the washer pump, unscrew the three screws that hold your washer pump and remove it from the machine properly.

How Do I Reset My Frigidaire Front Load Washer?

To reset your Frigidaire front load washer properly, unplug first the washer’s power cord back in to rest your appliances.

Because a Frigidaire front load washer doesn’t have an internal memory function, allowing you to program the setting that will remember each time you wash your load.

You only need to do a small amount of work when resetting your washer. Hence, you can reset your washer if you have already chosen a setting or started spinning your laundry.

1. Locate its Pause/ Cancel button on the front panel of your washer.

2. Then press the Pause/Cancel button. It will cause the load to spin when you press the button.

3. Press the Pause/Cancel button again. By doing so, will cancel the setting and resets your washer.

Following this guide is very important, especially in taking care of your appliances. You need to follow the instruction carefully so that your washer system will function well.

How To Prevent This Problem From Happening Again?

Like other home appliances, your washing machine also needs regular attention from you to maintain its functionality.

Having a broken washer means that you might deal with a flooded house.

Even a broken hose can discharge hundreds of gallons of water from your shower in a short time.

Why stress yourselves with these washer problems if you can prevent them from happening.

1. Check Your Washer Hoses

If your washer’s hose is damaged, it may cause the water inside the hose to leak. Every 12 months, you should take some time to check your washer hose if there’s a crack on it.

To prevent further significant problems.

2. Check Your Washer Seals

For the front load washer, check its door seal every time you use it. Just like with your washer hoses, inspects its seal for cracks, discoloration, detachment, other signs of damage.

If you notice the washer has damage, replace its broken seal right away.

3. Keep Your Drains Clear

Residues from in your washing machine drain throughout the years of usage. Your washer may experience a clog.

When something blocks your washer hose, stagnant water from the clogged can cause unpleasant odors and welcomes bacteria growth.

4. Keep Your Washer Dry

Even after draining and clearing the water inside your washer, naturally, there’s still a small damp will remain.

So, you need to leave your washer’s lid open after spinning your laundry. To let it dry-out inside.

If you have a front load washer, you can towel-dry its interior in every load of wash.

5. Clean Your Washer Always

If you use your washer regularly, it’s also appropriate to clean it afterward. Since, after spinning your loads of laundry, the dirt from your laundry will remain inside.

Please wash it with fresh water and mix it with a cleaner solution for the washing machine.


In summary, frequent use of your washer can also lead to some problems. It’s natural because we can’t avoid it there. Some clothing thread turns off and goes straight to your hoses/pumps, making the washer won’t drain properly.

It is why you need to clean and take some time to check out your Frigidaire front load washer once a year.

To know if there’s a problem so you will know when to fix it.

Lastly, we must check our pocket before we load our laundry in the washer to prevent damaging your washing machine.


Image credits – Canva

I have over 20 years of experience in construction. For the past 12 years, I've been mostly devoted to bathrooms, where I have my own business. I've seen almost every problem, so I believe I can help you. Read more